Our M6 Bindings fit a wider range of boot sizes. We use larger 6mm screws in the bail blocks, which allows us to use fewer screws. This makes for easier sizing adjustments, as well giving the M6 Bindings common screws with other Phantom components. Also, small features were added to the base plates to aid in self-clearing snow and ice build up for faster changeovers, while still being fully compatible with our patented board cleats.
The M6 was engineered from the deck up for a low foot height and direct power transfer. Five degrees of canting creates a more natural snowboard stance by reducing knee strain, and our patented Quick Flicks locking levers and pins make for quick and easy gloved changeovers. Bindings stow in pack for reduced touring swing weight.
Board cleats not included! Choose between our Adjustable 3-1 Cleats , Split Cleats, or Fixed Angle Solo Cleats
For those planning on using an Arcteryx Procline/Salomon S Lab boot, you need to order the longer Nylon toe bail screw
Setup Instructions
Bindings (2)
Tool Kit
- (1) 8mm Socket and Adapter
- (1) T30 Bit
- (1)Flat Head Bit
- (1) Blue Loctite
- (1) Ice Scraper Also available on its own here (Add link)
S/M - Small/Medium - Fits BSL 258-308mm
L/XL - Large/ExtraLarge - Fits BSL 298-348mm
The best metric for determining your binding size is BSL (Boot Sole Length). This measurement, in millimeters, is stamped on the lower part of most boots. If not, see here or contact the manufacturer to confirm the correct BSL.
If your BSL is between sizes, going with the smaller size will save some binding weight, however adjustability will be limited if you ever transition into a bigger boot. If adjustability is important, we recommend going with the bigger of the two.
Per set:
860 g (Size SM)
960 g (Size LXL)
